Flange plate adaptors represent the first generation of wheel balancing adaptors that allowed the wheel to be centered on the wheel balancer in a mirror image mount to the way the wheel was mounted on the vehicle.
This adaptor technology has been superceded by the QuickPlate adaptor. We continue to support the Flange plate adaptor technology as an alternative to the QuickPlate.
Flange Plate No.1: 241 801 409
PCD's (bolt patterns)
4x95.25/98/100/101.6/108/114.3/170/7x150
with 5 x 271 994 121 studs (100mm long, 22.5mm diameter, long taper)
Flange Plate No.2: 251 801 409
PCD's (bolt patterns)
5x98/108/110/115/120.65/135/154.95
with 5 x 271 994 121 studs (100mm long, 22.5mm diameter, long taper)
Flange Plate No.3: 251 901 409
PCD's (bolt patterns)
5x100/112/114.3/120/127/130/139.7/150/165,1
with 5 x 271 994 121 studs (100mm long, 22.5mm diameter, long taper)
Flange Plate No.4: 231 111 409
PCD's (bolt patterns)
3x98/112/114,3/115/120/127/130/132 6x135/139,7 4x165.1
with 6 x 271 804 118 studs (80mm long, 24.5mm diameter, short taper)
Stud I 271 994 117 100mm long 19mm diameter with long taper
Stud II 271 804 118 80mm long 24.5mm diameter with short taper
Stud III 271 904 119 100mm long 19mm diameter with long taper
Stud IV 271 804 121 80mm long 34mm diameter with short taper (Range/Land Rover)
Stud V 271 994 121 100mm long 22,5mm diameter with long taper.
